widely used for lamination with various golden or
silver paperboard. It can be easily printed and
suitable for out packing or for packing bags after
lamination with plastic film.
Standard
thickness:12,18,28,36,50,75um
The machine are designed for producing various of
plastic cups, trays , hamburger ,
lunch/fruit/flower box & pot, dishes , etc by
various of sheets , PE ,PP ,PS ,ABS ,
PET,PVC,PS,PS Foam (EPS) , Starch-degradation
sheets , Environmental sheets.
Technical
Parameter:
Useful Material:Sheet of PP,PET,
PVC ,PE, PS , Molding Area:680*1200 mm
Max. Production Height: 200mm Feeding
Stroke:500-710 mm Sheet Width Avilable :500 -
710 mm Sheet Thickness:0.1-1.2 mm
Working Capacity:3-8 cycles/min Power
Supply:380/220V 50Hz 3 phase 4 lines Air
Supply : 0.8-1 Mpa Heating Power:25.4 Kw
General Power:32.7 Kw
Dimension:7080*1640*2580 Weight:3000 Kg
Main Function:
Two times of molding
Vacuum Relay Same Stroke Up/Down Adjust
Blowing-out PLC Touch Screen Monitor With
PLC System Control for forming & heating Far
infrared ray heater controlled by the
intellectual temperature control Feeding
Chain buried with cooling system Fan Cooling
& Blowing-out system
Technical Service:
Technical support for new mold development
Warranty and technical support after new machine
sales Free installation , Operation
training
High surface area, large heat capacity, low
thermal expansion, resistant to corrosion and high
temperature, ceramic honeycomb monoliths have been
well used in chemical, metallurgical, gas and
environmental protection industries. The main
usage is as follows: 1) Tower packings - With
high surface area, even distribution of fluid and,
efficient in mixture separation in chemical &
petrochemical industries. 2) Catalyst carriers
- Reduce the oxidation temperature of VOC in
purification of industrial exhaust gases in RCO
systems and automobiles. 3) Regenerative heat
step - up transformer - Large heat capacity, low
resistance to fluid and, energy saving up to
40~70% in RTO systems. 4) Gas combustion
distributor - Distribute the heat uniformly, and
make the combustion completely, It can save energy
more than 10%. 5) Kiln furniture in refractory
industries - Low bulk density and high thermal
efficiency.
Large hole ceramic ball arch are new types of
supporting structure for sulphuric acid drying and
absorption tower.Compared with the old
structure,they have the characteristic of even
distribution of gas,high mechanical strength,high
safety coefficient,great stability,excellent
corrosive resistance,easy assembly and long
lifetime etc. The featured parameter and
specification of large hole ceramic ball arch:
• In terms of inner diameter of equipment,the
diameter of ball arch ranges from 500-10000mm.We
can customize according to the demand of customer.
• Main parameter:hole fraction rate at 65% Acid
resistance at 99.8%. (1)Chemical composition :
Large hole ceramic ball arch are new types of
supporting structure for sulphuric acid drying and
absorption tower.Compared with the old
structure,they have the characteristic of even
distribution of gas,high mechanical strength,high
safety coefficient,great stability,excellent
corrosive resistance,easy assembly and long
lifetime etc. The featured parameter and
specification of large hole ceramic ball arch:
• In terms of inner diameter of equipment,the
diameter of ball arch ranges from 500-10000mm.We
can customize according to the demand of customer.
• Main parameter:hole fraction rate at 65% Acid
resistance at 99.8%. (1)Chemical composition :
Acid-heat resistant brick and plate are mainly
used in chemical industry,acting as lining of
device for drying absorption,cooling,recycle and
store toward acid and other corrosive
medium.Meanwhile,it can be used for lining of
sub-sulphuric acid boiler and furfural hydrolyzed
boiler in paper making industry.We can design and
produce in accordance with the customer''''s
requirements. Technical data of acid- heat
resistant brick and plate : Volume density
g/cm3: 2.21-2.24 ; ASTM (Measurement
standard). Void volume % : 9.3-10.5 ; ASTM
(Measurement standard ). Water absorption % :
<0.2 ; ASTM (Measurement standard ). Heat
stability 950-20℃: 30 do not crack ; DIN
(Measurement standard ). Bend strength Mpa :
2138 ; DIN (Measurement standard ).
Compressive strength Mpa : 123 ; DIN
(Measurement standard ). Thermal conductivity
W/m.k : 1.175 ; DIN (Measurement standard).
Thermal-expansion coefficient 1/℃ :
3.2ⅹ10-6; DIN (Measurement standard ).
Thermal expansion rate % : 0.31 ; DIN
(Measurement standard ). Acid resistance % :
99.8 ; DIN (Measurement standard )
Acid resistant ceramic is widely used in the
fields of petroleum,chemical
engineering,pharmacy,food,paper
making,fertilizer,pesticide,chemical
fibre,textile,smelting,electricity plant.play its
anti-corrosive role in the working field of sewage
treatment project and outdoor ground. (1)Main
technical data of acid resistant ceramic :
Volume density g/cm3: 2.31-2.4 ;
ZBG94003-86 (Measurement standard ). Water
absorption % : ≤2.0 ; GB8488-87
(Measurement standard ). Acid resistance % :
≥99.8 ; GB8488-87 (Measurement
standard). Bending strength Mpa : ≥29.4
; GB8488-87 (Measurement standard ).
Compression strength Mpa : ≥120 ;
ZBG94003-86 (Measurement standard). Heat
stability 130℃-20℃ : Do not split
three times ; GB8488-87 (Measurement standard
). Note:we can produce in terms of product
drawing and technical data from the customer .
(2) Main specification of acid resistant
ceramic : Standard brick :
230ⅹ113ⅹ65 (Size ); Acidproof
porcelain plate : 100ⅹ110ⅹ15 ;
Liquid-surface covering ball has the
characteristic of stable barycenter, superposition
side by side and excellent covering
performance.This product is widely used in
coagulate water tank and salt eliminating water
tank in water treatment. Main technical data :
Name :Covering ball ; Type mm : φ40 ;
Density g/cm3: 0.5 ; Temperature :
≤120 ; Compressive strength:≤0.4 ;
This item is widely applied in the tower packing
of petroleum,chemical engineering, chlorin
alkali,coal gas and environmental protection. Some
of its technical datas are as follows :
(1)Name :Rectangular saddle ring ; Type mm
:25; Dimension d×h×δ :25×12.5×1.2 ;
Specific surface area （m2/m3）
:288; Void m3/m3:0.847 ; Heaping number
n/m3:97680 ; Heaping weight kg/m3:102; Dry
packing factor m-1:473. (2)Type mm :38;
Dimension d×h×δ :38×19×1.2 ; Specific
surface area （m2/m3） :265; Void
m3/m3:0.95 ; Heaping number n/m3: 25200 ;
Heaping weight kg/m3: 63; Dry packing
factor m-1:405. Remarks :More information can
be read on our webste ,and there are othe names
belonging to plastic randon heaping packing such
as Haier ring ,Rosette ring ,Polyhedral hollow
ball .Each of their own datas can also be read on
our website.
Plastic tower packing has the characteristic of
large void rate,low pressure drop and low height
of mass transfer unit,high extensive point,full
contact of gas and liquid,low specific weight and
high mass transfer efficiency.The operation
termperature ranges from 60-150 ℃ . This
item is widely applied in the tower packing of
petroleum,chemical engineering, chlorin
alkali,coal gas and environmental protection.Its
partial technical datas are listed as follows:
(1) Name :Pall ring ; Type mm :25;
Dimension d×h×δ :25×25×1.2 ; Specific
surface area （m2/m3） :175; Void
m3/m3:0.90; Heaping number n/m3:53500 ;
This item is widely applied in the tower packing
of petroleum,chemical engineering, chlorin
alkali,coal gas and environmental protection. Its
partial datas are listed for your reference:
(1) Name :Conjugate ring ; Type mm :25;
Dimension d×h×δ :25×25×1.2 ; Specific
surface area （m2/m3） :243; Void
m3/m3: 0.95 ; Heaping number n/m3: 58030 ;
Wearable ceramic ball is widely applied in
hydrogenation cracking, distillation of
hydrogenating body, alkyl ,catalytic and
reconstructive device and drying tower in
refinery.Also used in callback of light oil in
oilfield,treatment of various chemical
drainage,translating stove in fertilizer
factory,activated division equipment,hot air
furnace and sulphuric acidic translater etc.
(1)Main performance indices ：
Contents of Al2O3： 55-65-95% ；
Specific gravity ：
2.7-2.8-3.7g/cm3；
Hardness ：
∶8.5 mohs ；
Compressive strength
： ∶1690MPa ；
Water
absorption ： ÷0.2% ；
Wear ability
： 0.05% 。
（2）Varieties and application of
ceramic ball ： Hole-opening ceramic
ball ： Catalytic carrier of high flux
with low resistance ；
Wearable ceramic ball is widely applied in
hydrogenation cracking, distillation of
hydrogenating body, alkyl ,catalytic and
reconstructive device and drying tower in
refinery.Also used in callback of light oil in
oilfield,treatment of various chemical
drainage,translating stove in fertilizer
factory,activated division equipment,hot air
furnace and sulphuric acidic translater etc.
(1)Main performance indices ：
Contents of Al2O3： 55-65-95% ；
Specific gravity ：
2.7-2.8-3.7g/cm3；
Hardness ：
∶8.5 mohs ；
Compressive strength
： ∶1690MPa ；
Water
absorption ： ÷0.2% ；
Wear ability
： 0.05% 。
（2）Varieties and application of
ceramic ball ： Hole-opening ceramic
ball ： Catalytic carrier of high flux
with low resistance ；
Ceramic standard structured packing is a kind of
column shape and single layer corrugated
packing,consisting of many moire pieces with the
same geometric shape and parallel to each other.
According to the different obliquity of corrugated
sheet,this product is divided into X-style and
Y-style,and X and Y stand for the 30oand
45orespectively. Ceramic standard structured
packing has a series of advantage, high
efficiency,low pressure drop,great treatment,and
so on. Some of the type and technical datas
are given to you for a reference:
Type:160Y ;
Specific Surface m2/m3:160; Heaping Density
kg/ m3:370; Void Ratio %:85; Lean
Angle:450; Pressure Drop mmHg/m:2; HETP
m-1:2; Hydraulic Diameter mm:15; Liquid
Load (m3/m2.h):0.2-100; F-Factor m/s[kg/m3]
0.5:2.8.
Type:250Y ; Specific Surface
m2/m3: 250 ; Heaping Density kg/ m3:42;
Metallic standard structured packing can be
divided into, gill net ripple packing, pass place
ripple packing, silk screen ripple packing and
mesh plate ripple packing. Some of the
technical data(stainless steel) of metallic
standard structured packing are as follows for
your reference: Packing name :Gill net ripple
packing ; Type :CB-700Y ; TheoreticalPlate
No/m:5-7 ; Specific surface area m2/m3:700 ;
Void rate% :85; Pressure drop mmHg/m2
:9.3×10-4; Heapingweight kg/m3:240-280 ;
Liquid load m3/m2hy :0.2-100 ; The biggest
F factor (kg/m3 )0.5 :1.0 ; Wave crest hight
mm :4.5. Remarks:More informations you can get
on our website and there are other three types of
various technical datas.
Acrylic packing is made from acrylic fiber ,
lubricated with PTFE , it has good performance in
many industrial application . with it's good
corrosion resistance , it normally used in at
static sealing applications. you can contact with
us for details information .
Expanded graphite braided packing is made from
expanded pure graphite yarn, braided into packing
through all kinds of technology of braiding. It
can be divided into expanded graphite braided
packing with inconel wire inserted, expanded
graphite braided packing with fiberglass, expanded
graphite braided packing impregnated with PTFE
dispersion, expanded graphite braided packing with
less weight loss etc.
The products are almost
suitable to all media, such as hot water, seam,
acids, alkalis, organic solvents, hydrocar-bens,
low temperature liquids, etc. The sealing
capability is more better and safety. It is the
most effective composite parts for solving
problems.
Max. working temperature: 850°C
Max.
working pressure: 25. Mpa PH value: 0 ~-
14
Density: 1.0 ~ 1.2 Size: 4 x 4 ~ 100 x 100
