The BOPP film
(Biaxial-oriented Polypropylene film) production
line consists of casting sheet extrusion, biaxial
orientation, after treatment, rolling, cutting,
and automatic control. It can produce BOPP films
of various specifications and stable dimensions,
with good mechanical and electrical performances,
good heat resistance, cold resistance and
gastightness. weesign and manufacture of the
production lines for producing BOPP films of the
following specifications are
supplied: 1. Stable physical properties
1) Good transparency 2) Glossy 3) Easy
print surface Specifications: 1) Thickness:
12 - 80 micron 2) Width: <4,200mm 3) Length:
<5,000m Inner packing: Bubble film and
wooden plate on both sides Outer packing:
Pallets 2. M-PP/S-PP Mainly for
metallized-film capacitor 4um--12um RPP/RRPP
Mainly for foil-film capacitor 6um --18um By
adopting the imported super high-purity
capacitor-grade home-polypropylene resin, the film
is made by biaxial-orientation tenter process.The
film features excellent profile evenness, high BDV
and high mechanical strength. The winded
capacitors take on the characteristics of low
dielectric dissipation and high insulation
resistance. QTY :300000tons
Features 1) The three-layer
extrusion POF film is light, non-poisonous,
odorless and has advanced property of high
strength, high heating shrinkage rate, good gloss
and the capacity of heat sealing or
welting 2) Can also be recycled 3) With the
excellent function and characteristics, it is
widely used in the packing of foods, beverages,
drugs, textile products, stationery, AV products,
floppy disks, handicrafts and toys,
particularly for irregular shape of products,
satisfying the demand of packing and marketing
for damp free, dust-free, anti-thief and
transparency, and meet the requirements of cost
saving and environment
protection 4)single-layer thickness 12-30mic,
width 60-3000mm, double-layer thickness
12-30mic, width 60-1500mm, cylinder hot cut
thickness 12-30mic,width 60-1500mm
1) Thickness of film: 15 - 50μm 2)
Thickness of aluminum layer: 50 - 700A 3)
Width: ≤2,100mm 4) Roll diameter:
≤780mm 5) Roll ID: 76mm (3"), 152mm
6") Regular specifications: Thickness of
film is 19μm; thickness of aluminum layer
is 380A; length is 4,000m/roll and roll ID is
76mm; other specifications can be customized.
2. M-PP/S-PP Mainly for metallized-film
capacitor 4um--12um RPP/RRPP Mainly for
foil-film capacitor 6um --18um By adopting the
imported super high-purity capacitor-grade
home-polypropylene resin, the film is made by
biaxial-orientation tenter process.The film
features excellent profile evenness, high BDV and
high mechanical strength. The winded capacitors
take on the characteristics of low dielectric
dissipation and high insulation resistance. QTY
:300000tons
Detailed Product Description PET
film are mainly classified as milk white PET,
transparent PE, lightless PET , lightlessmilk
white PET products etc. Features: 1.Made of
LLDPE via common laminationand mould-blowing
2.Customized design, thickness and
size. 3.Printing,compound. 4.Highquality and
low price ,convenient use. 5.Have
characteristic of exquisite,unique
design. 6.Used for farm film ,trash
film,personal daily use paper etc . QTY
1200rolls/day
High glossy metallized PET
is a kind of metallized PET films. It has good
property of gloss surface and Excellent
decoration effectiveness. Super luster can be
attained through particular material used and
processing technology.
Property 1.Thickness
uniformity 2.Mechanical performance 3.Super
gloss 4.Surface smoothness 5.Thickness
consistency and heat stability 6.Good adhesive
capacity 7.Excellent surface activity and
mechanics adaptability 8.Oxygen and air barrier
Main Application 1.Vacuum metallizing, such
as packaging for food, cigarette and
wine 2.Super decorative
capability Specifications: 1) Thickness of
film: 4 -150μm 2) Thickness of aluminum
layer: 50- 700 Ao 3) Width:<=2,100mm 4) Roll
diameter: <=780mm 5) Roll ID: 76mm (3"), 152mm
(6") QTY 1200rolls/day
Type General
Cigarette Film for Small pack Specification
width of 117mm Generally used for soft packing
of small pack cigarette Generally used for
carton packing of soft pack cigarette.
Shrinkable Film For Small Hard Pack
Specification width of 120mm Generally
used for small packing of hard pack cigarette.
Characteristic The film is improved on the
base of 55 type shrinkage film, the
thrid-generation small packing film of our
products. Specification width of 340mm,350mm
Generally used for carton packing of either
soft or hard pack. 1. Good suitability to
processing machine, used to all kinds of carton
packing machines. 2. Good heat shrinkage,
providing tightly packing. 3. Excellent
Shielding to fragrance. 4. Superior
anti-static property. Shrinkable Film for Soft
Pack 1. The proper heat shrinkage create the
effect of close-fit package for the soft cigarette
packets. 2. Quick heatsealing at low
temperature and pressure. 3. Inferior optical
properties to others. Also we could do all
size upon buyer''''s asking QTY 120000tons
1.Generally used for
soft packing of pack cigarette
Characteristic 1).ell-fitting to machine,
suitable for high speed packing of all kinds of
soft pack. 2).Special hot slip ability on
surface,can avoid machine-blocking,sticking etc.
3).Quick heat sealing at low temperature and
pressare. 4).Good foldability after forming.
5).Inferior optical properties to others.
2.Both side heat-sealable coextruded BOPP Film
for high speed cigarette overwrap 1).The proper
heat shrinkage create the effect of close-fit
package for the soft cigarette packets.
2).Quick heatsealing at low temperature and
pressure. 3).Inferior optical properties to
others. 3.Characteristic 1).Excellent heat
shrinkage providing tightly
packing. 2).Tolerance sliping specially
designed on the surface, suitablefor fitting
packing. QTY 120000tons
We can supply polypropylene regenerated granules
made from PP sheet scrap. Granules are in mixed
colour with MFI 2.3~2.9. Send us an email at
exportco@gmail.com for more information.
Capacitor Polypropylene
film M-PP/S-PP：Mainly for
metallized-film
capacitor（4μm--12μm
） RPP/RRPP：Mainly for foil-film
capacitor（6μm
--18μm） By adopting the imported
super high-purity capacitor-grade
home-polypropylene resin, the film is made by
biaxial-orientation tenter process.The film
features excellent profile evenness, high BDV and
high mechanical strength. The winded capacitors
take on the characteristics of low dielectric
dissipation and high insulation resistance.
GD-APP104 Non-Halogen intumescent Flame Retardant
For
Polyolefines
Specification:
Appearance
white powder
Phosphorus mass fraction%
22.0-24.0
Water content %
0.5Max
Density g/cm3
about 1.8
Bulk density g/cm3
about 0.5
Thermal decomposition onset, scan rate 30degrees Celsius/min,degrees Celsius
250 Min
Particle size ,um
25 Max.
Key properties:
GD-APP104 is a non-halogenated flame retardant based on GD-APP101, which develops its effectiveness through phosphorus/nitrogen synergism. When incorporated into polyolefine, it shows high processing stability and no migration.
GD-APP104 differs in its mode of action from halogenated flame retardants in the fire. When the polyolefine on exposure to flame, the carbon foam layer formed protects the polymer through its heat insulating effect to reduce further oxygen access and prevent dripping of the polymer. At the same time there are no thrill halogen hydride gases to produce.
Applications:
GD-APP104, may be mostly used in a range of thermoplastics,rubber,resin, especially PP, PE, EVA, TPE etc., which is suitable extrusion and injection moulding applications. The flame retardant property reaches UL94 V-0 Level.
The plastic plain netting is processed and made of
polyethylene and polyproplene. It have the
performances of wear-resisting,
corrosion-resisting, fine toughness, it can
instead of metal wire.
Colour: black, white,
blue, green, yellow, red, etc.
Uses: main used in
oil, chemical industry, aquatic breed, back
cushion of car, mattress, air conditioner wire
mesh, stop burn wire mesh, and road bed mesh,
etc.
Fiberglass Insect Screening Material: Fiberglass
Wire
Color: White, bluish white
Weaving:
Galvanized after weaving or after weaving; Plain
weave
Property: Flexible, corrosion resistant,
easy cleaning and keeping forms
Application: For
construction, machine protection and keeping
mosquito and insects out of residences.
Metallized pp film M-PP/S-PP Mainly for
metallized-film capacitor 4um--12um RPP/RRPP
Mainly for foil-film capacitor 6um --18um By
adopting the imported super high-purity
capacitor-grade home-polypropylene resin, the
film is made by biaxial-orientation tenter
process.The film features excellent profile
evenness, high BDV and high mechanical
strength. The winded capacitors take on the
characteristics of low dielectric dissipation
and high insulation resistance.
Polypropylene
,film,bopp film ,metallized-film,foil-film
,Capacitor Polypropylene film
Clarifying agent BT-9803 is a high performance
sorbitol based clarifying agent that reduces haze
and enhances the clarity of polypropylene through
nucleation of the polymer. This also leads to
enhanced stiffness of the molded part and to
shorter cycle time during the molding process.It
is nearly same as Millad 3988 from America, but
much lower in price.
We are specilize in producing pp woven bag,pp
bulk bag,and bopp bag,all of the bags are of high
quality and competitive price,please contacts us
for details
We are specilize in producing pp woven bag,pp
bulk bag,and bopp bag,all of the bags are of high
quality and competitive price,please contacts us
for details
Anping Sanxing Wire Mesh Factory Dryer Fabrics
- carry paper through the drying process
General specification of dryer
fabrics According to the weaving, it can be
divided into three or four shed; According to the
types it can be divided into one and half layer or
double layers; According to joining, it can be
divided into seamless, spiral ring and pin
joining; 3-shed one layer and a half fabric is
suitable for drying papers below 70g; 4-shed
double layer fabric is suitable for drying papers
above 70g. It is suitable for making
paperboard, kraft paper, tissue paper, ticket
paper etc. It also can be used in coal mine, food
and medicine industry as the conveyor belt of the
equipment More information about our company
and our product,welcome to visit our website:
http://www.sx-wiremesh.com Email:
sxwiremesh@188.com MSN: demi421@hotmail.com
Dear sir/madam, thank you for spending time on our
message. It’s our pleasure to introduce ourselves
as a leading manufacture and exporter in stainless
steel wire mesh field. Our company founded in
1986, in Anping County, Hebei of China. After
years'''' of development, the company has grown
into an all-round enterprise, getting
wire-drawing, mesh-weaving, further processing
netting products as a whole. Details of the
product; Fabrication Material:
polyester According to the weaving, polyester
forming fabric can be divided into 3-shed, 4-shed,
5-shed, 7-shed, 8-shed, 16-shed and 24-shed
etc. According to the category, it can be
divided into single layer fabric, double layer
fabric, two and a half layer fabric and three
layer fabric. 1. Three shed single layer fabric
is suitable for making pulp and packing
papers. 2. 4-shed single layer fabric is
suitable for making culture, printing and packing
papers etc. 3. 5-shed single layer fabric is
suitable for making toilet paper, printing and
packing papers etc. 4. 7-shed double layer
fabric is suitable for quality printing paper and
tissue paper etc. 5. 8-shed single layer fabric
is suitable for making high basic weight paper and
packing papers. 6.16-shed double and a half
layer fabric is suitable for making quality
printing paper, tissue paper and surface
pulp, inner pulp and base pulp. 7. Multi-shed
three-layer fabric is suitable for making quality
printing paper, tissue paper and cigarette paper
etc Our products are known for their high
quality standards and the outstanding performances
of their composition material in several
fields.Like wood industry,building industry,paper
making industry,food industry,mechanical industry
etc.
Polyethylene: 1. High Density below
molding 2. High Density Injection molding 3.
High Density film grade 4. Low
Density Polypropylene: 1. Injection
molding 2. Extrusion Polystyrene: 1.
Injections molding 2. Extrusion Please note
that my client is ready to purchase
any Available quantity on condition the price
is Competitive, i.e lets say 10,000mt to
50,000mt of each Type.
